New tech in the house can sometimes take a little bit of time to get familiar with. Luckily, if your First Alert carbon monoxide alarm is holding a steady red light, this means that it is operating normally.
On First Alert carbon monoxide alarms, the red light flashes to show the CO alarm is properly receiving battery power. If you do not see the red light flashing, change the batteries in the alarm immediately.
How to test your carbon monoxide detector to ensure they are working properly? It is important to test your detectors monthly to ensure they are working properly. To test your CO alarms, press and hold the test button on the alarm. The detector will sound 4 beeps, a pause, then 4 beeps for 5-6 seconds.
What does it mean? This is the power indicator light: First Alert and BRK alarms have a power indicator light to show you that your alarm is receiving power. Some alarms have a red or green light that blinks every few minutes, while other models blink rapidly or shine a solid light.
A blinking red light on a smoke detector is rarely cause for alarm. Instead, it usually means that the battery is low, or the detector is in need of a minor repair. If you notice a blinking red light, replace the battery first – but only if you're sure that it's still good.
In others, a steady or blinking green light on a carbon monoxide detector can mean it's detected a** low-level presence of carbon monoxide**. If the presence increased, it would cause the alarm to sound. It could also mean it's time to replace the battery, especially if it's also chirping.
Signs of a carbon monoxide leak in your house or home
Sooty or brownish-yellow stains around the leaking appliance. Stale, stuffy, or smelly air, like the smell of something burning or overheating. Soot, smoke, fumes, or back-draft in the house from a chimney, fireplace, or other fuel burning equipment.
Low level: 50 PPM and less. Mid level: Between 51 PPM and 100 PPM. High level: Greater than 101 PPM if no one is experiencing symptoms. Dangerous level: Greater than 101 PPM if someone is experiencing symptoms.
If your smoke detector is blinking red, it means that the batteries are low. While this can happen with all smoke detectors, it's more often the case with First Alert smoke detectors, since they are known for their exceptionally long battery life.
Self Checks/At-Home Testing
There isn't a self-diagnosis option for carbon monoxide poisoning, but anyone with confusion or a loss of consciousness should have 911 called for them.
Opening a window will slow carbon monoxide poisoning, but it likely won't stop it. There simply isn't enough airflow through most windows to get rid of the poisonous gas, and it could take between four and eight hours for the CO to dissipate entirely.
If the carbon monoxide concentration in the air is much higher, signs of poisoning may occur within 1-2 hours. A very high carbon monoxide concentration can even kill an exposed individual within 5 minutes.
Flashing Red is Good on Many Models
Often when we see red lights on things like our car, or a red pen used by a teacher, we think the red is bad. However, on most smoke detectors, it is a good sign. Red flashing on some smoke alarms signals that all is well and it is working.
If your detector or alarm has a blinking or steady light with no audible alarm sound, this typically indicates that the unit is receiving power.
If your smoke detector has a blinking red light that flashes every 10 seconds, it means that it is reacting from the after-effects of smoke and is in a temporary desensitized state. When the smoke is no longer heavy in the air, the smoke detector should silence its alarm and the red light will start blinking.
Carbon monoxide (CO) poisoning can become deadly in a matter of minutes. If you suspect CO poisoning, leave your home or building immediately and call 911 or go to the emergency room. If treated quickly, the effects of CO poisoning can be reversed.
Most people with a mild exposure to carbon monoxide experience headaches, fatigue, and nausea. Unfortunately, the symptoms are easily overlooked because they are often flu-like. Medium exposure can cause you to experience a throbbing headache, drowsiness, disorientation, and an accelerated heart rate.
Clothes dryers. Water heaters. Furnaces or boilers. Fireplaces, both gas and wood burning.
Carbon monoxide alarms alert you with four beeps. A single chirp means the battery is low or the detector should be replaced.
If your detector is low on battery, you will likely hear a short chirp every minute. To warn of dangerous CO levels, most detectors will beep 4 or 5 times in a row about every 4 seconds.